Testing Moisture Resistance on your Concrete Deck Sealer

A concrete deck contractor specializes in identifying the condition of your existing concrete. One essential work they do is to check your concrete for moisture. 

It could be that your concrete deck sealers had faded and need refinishing.

Seattle Deck Contractors will help determine if your sealer has been compromised or is simply a victim of Seattle’s weather.

Essential Processes when Testing the Moisture on Your Concrete

Seattle weather can be cold and moist and could emerge among dark, underground spaces.

Moisture on the concrete can also tell if there is severe damage on the floor.

To test for moisture resistance, Seattle contractors typically follow steps to get a precise assessment of the floor.

Determine the Level of Moisture

The first step is using calcium chloride tests to determine the concrete’s moisture level. 

If you see that the reading levels should be different from where they should be, then it’s time to refinish the deck with another coat of sealer.

Preparing the Tools

Next is to prepare the tools, device, and other materials for testing. Having all the necessary tools and knowledge is to get your concrete back in great shape immediately! 

What experts do is distinct from a DIY repair or maintenance. Experts take time to do each treatment. 

In testing the concrete, the expert must aim to get accurate results. A waterproof deck flooring company Seattle ensures your concrete stands strong against Seattle’s wet weather conditions.

Using the Pressure Meter

You could also try using a pressure meter designed to test the moisture resistance of your concrete deck sealer. 

Just like calcium chloride, these devices can accurately measure and identify any higher-than-acceptable moisture levels in a given area. 

If you’re looking for an even more malleable solution, try using silicone caulk to seal up any cracks or gaps present on the surface of your concrete deck. 

Silicone caulk is excellent at blocking out water and providing a long-term solution for keeping your concrete dry.

Reasons Why Moisture Exists on your Concrete and How to Prevent Them

Moisture on your concrete can be caused by a few different things, including:

Poor Drainage in the Area

Make sure that there is adequate drainage and that any water runs off away from your property.

Water builds up and saturates the slab if it is not adequately drained. Either the ground is too level, or there is a blockage intercepting the water’s path.

Improper Installation of Sealant

If the sealant is not installed correctly, it could create pockets that allow moisture to seep in.

Cracks or gaps in the surface can develop over time due to environmental factors such as freezing temperatures. Make sure these are sealed with silicone caulk or another appropriate product.

To prevent moisture from entering and damaging your concrete deck sealer, take proper steps to protect it from the elements. 

That is where your expert contractors come in. This is a team of professionals who offer maintenance services so that you can prevent the worse form from happening in your properties.

Wrapping Up

These are just a few ways to check the level of moisture resistance on your existing concrete deck sealer – make sure to contact a reliable concrete floor contractor. Find them and all kinds of assistance in testing and maintaining the integrity of your sealant.

Our Clients:

University of Washington
Scroll to Top