Extreme weather changes often happen nowadays. And this dramatically affects the conditions of porous materials like concrete floors. That said, you need floor refinishing in Seattle to prevent severe damages.
But why refinish floors? And how do you do it? Should you do it yourself for any maintenance or repair?
Today’s post explains how to refinish concrete floorings and a few tips on why it is a must!
Should I Refinish My Floors?
As a homeowner, your daily routine might get hampered by repairs. You might have heard of how refinishing can make a practical choice. So is this the one method that suits your floor’s requirement?
Here are the essential steps and processes when considering refinishing. Please have a quick look and understand what goes into the entire process and make it one of your maintenance routines for the concrete steps in your properties.
Examine the floor
First, you have to examine the floors. Check out and see what is happening on the surface. You must figure out the real and deep condition of the concrete. Here you will see signs that it passes the requirements for refinishing. Some cracks might appear thin and trim on the surface. But the real issue within the slabs is not apparent. Instead, what you will need is a more complex repair method like resurfacing or replacement.
Examine the floors and also explore the different repair methods for concrete. If you look around on this site, you will find out and compare the differences among various techniques.
Clean the floor
After that, you have closely analyzed the surface condition of the concrete flooring. Next is to clean the floor. With this step, you are making sure that what you have observed on the surface of the flooring is correct.
Yes, that is right! As you clean, you take a second helping of the essential step. And there is nothing wrong with double-checking the floor’s condition. As you clean, you’ll realize the surface does not have damaging cracks. You see, it only needs retouching. Then you know then that refinishing is indeed what will work best for your floors.
So, in cleaning, you can use tools and devices to ensure that the surface is adequately prepared. You got two:
- Pressure Washer
- Floor grinder or polisher
The pressure washer helps peel off the residues that have been stuck on the surface for a long time. Removing all the residues using pressurized water is effective. It leaves a clean surface ready for coating. The water helps to force out any mud or thick layers of the old material resulting in a smooth, refreshed surface for new coating application.
Make Any Necessary Repairs
After cleaning, a more clean slate would reveal before your eyes. You can see, too, if there are necessary repairs that must be done.
Minor cracks will require resealing or crack filling. Before you retouch the flooring, any holes, dents, or uneven spots must be fixed. Only when you repaired
Stain your floors
Instead of covering damaged flooring with carpets, mats, or tiles, why not simply stain it. Staining is a refinishing treatment that polishes the surface and revives its coloring or vibrant look with stain.
Take a quick look at the previous process above. Crack filling or repaired slabs may appear off or unattractive for displaying noticeable patches or followers.
Refinishing will commonly use acid staining. Staining will create a washed-off or vibrant coloring on the top of the flooring. This will make a washed-off look.
You may leave the flooring with a whitewashed appearance to take on a simple, sharp, and clean appearance. Or you can top it with concrete sealers to complete it with a shiny, polished surface. In this last process, you can opt to use urethane, epoxy, or acrylic-based sealers.
