After several years of everyday abuse, it is more likely than not that a garage floor’s old beauty is gone. What exists now is a pitted one, with surfaces peeling, and simply chipping away because of old age. Learning how to properly resurface is something that will be useful when some transformations are needed through some quick easy fix. Resurfacing garage floors 101 means knowing how to prepare, what tools and materials are to be used, and how to do the re-surfacing the right way. Here’s how.
First, a tour and visual inspection of the area is a must. If the garage floors have damaged spots that are more than 1/8 inch deep, there are some products in the market that could easily solve the problem. Usually, these products are mixed with water until the mixture reaches a consistency that is just right like that of pancakes in the kitchen. The first batch of the mixture is then applied as a primer coat. It is advised that priming be done on a limited area at a time. When all the spots are filled and the repair is done, the surface needs to be dried for about 24 hours. Sometimes, resurfaced material becomes unsuccessful because of the moisture that sometimes comes from under the concrete floors. What is needed is a good moisture vapor blocker. Most products are like epoxy material that is used as paint and serves as primer and sealer. Usually, sand is used in the second coat.
But, as a basic step of resurfacing garage floors 101, the area needs to be cleaned first before proceeding with priming and coating. A rag will do to wipe off all pigments or spillages on the concrete and a broom to remove all dirt and debris. But heavily damaged areas with stained insoluble to water should be given other treatments. To completely clean it, spray the entire area with clean water. A garden hose will be of much help this time. Drying the area comes next. It is then ready for priming.
However, resurfacing garage floors 101 could also mean some simple ways of coating the surface with epoxy paint especially when the damages are not that great. The material commonly used to do the trick is also mixed with water. It is best to put the mixture in a bucket to avoid any spillages or drips on the garage floor. But when coating large areas, transfer the mixture into a paint tray and work with a roller. The rugged or rough spots on the garage floors are patched using the simple direction in the product. The process of repainting is done several times until the transformation is complete. This usually dries in about several hours and repainting of the concretes can be done in just a day
After the project, the newly retouched garage is more gratifying having not spent much money and the project is done in a day. Truly, resurfacing garage floors 101 is quite a simple task. But when the garage has damages that are beyond simple repair, it is best to hire a professional. After all, it is one of the most important parts of the house.