Concrete is a popular flooring material because it’s tough and long-lasting. However, it can be prone to water damage if not correctly waterproofed.
In this guide, we will walk you through the process of waterproofing concrete floors so that you can rest assured that your flooring investment will last for years to come!
Concrete waterproofing Seattle is a simple process that involves applying a sealant to the concrete surface.
This will create a barrier that will prevent water from seeping into the concrete and causing damage. There are many different types of concrete sealants on the market, so research is essential to find the best one for your needs.
Once you have selected a concrete sealant, you must prepare the concrete surface for application.
This usually involves cleaning the surface with a power washer or pressure washer. Once the surface is clean, you can apply the concrete sealant according to the manufacturer’s instructions.
After applying the concrete sealant, you should allow it to cure for 24 hours before walking on its surface.
This is your ultimate guide to concrete basement waterproofing in Seattle.
Main Processes of Waterproofing Concrete Floor
The following are steps to waterproofing the concrete floors found especially in your basement:
1st STEP: Clean and Declutter the Floor
The first thing you need to do is to clean the concrete floor thoroughly. This will help ensure that the waterproofing material can adhere properly. You can use a power washer or pressure washer for this task.
Once the floor is clean, declutter it as much as possible. Move all furniture and other items away from the concrete surface.
If there are any cracks or holes in the concrete, now is the time to repair them. You can use a concrete patching kit for this task.
Make sure the concrete surface is completely dry before proceeding to the next step.
2nd STEP: Thorough Inspection for Cracks to Repair
Once the concrete floor is clean, you must inspect it thoroughly for any cracks or holes, and these should be repaired before proceeding with the waterproofing process.
You can use a concrete patching kit to repair tiny cracks and holes. For larger cracks, you may need to consult with a professional contractor.
Once all the cracks are fixed, you are ready for the next step.
3rd STEP: Check your Plumbing and Drainage System
You must check your home’s plumbing and drainage system to see if holes are repaired. Make sure there are no leaks or other problems that could cause water to seep into the concrete floor.
If everything looks good, you can proceed to the next step.
4th STEP: Apply Waterproofing Sealant, Multiple if Necessary
Your final step is applying a concrete sealant to the concrete floor, which will create a barrier that will prevent water from seeping into the concrete and causing damage.
The waterproofing material can be applied to the concrete floor using a brush, roller, or sprayer.
After applying the waterproofing material, you should allow it to cure for 24 hours before walking on its surface.
There are many different types of concrete sealants on the market, so research is essential to find the best one for your needs.
Contact a Professional Concrete Floor Contractor
If you need help waterproofing your concrete floor, contact a professional concrete floor contractor. They will be able to advise you on the best products to use and how to apply them properly.
